Series CTI Linear Heat Detectors

Series CTI (Confirmed Temperature Initiation) Linear Heat Detectors used with CTM-530(LT) Interface Module. Model

designation identifies operating temperature rating: CTI-155 {155°F (68°C)}, CTI-190 {190°F (88°C)}, CTI-220 {220°F (105°C)},

CTI-280 {280°F (138°C)}, and CTI-356 {356°F (180°C)}. Suffix, R or X, is added for alternate outer jacket materials. Each

上海接线盒ZB-5-QC,ELR-4-QC缆式线型感温探测器.感温电缆接线盒感温电缆始端盒_路灯电缆防水接线盒相关-上海道夫自动化仪表工程有限公司

cable is a continuous line type open circuit detector that shorts when in an alarm condition. Spacing guide for the cables:

CTI-155 and CTI-190, 30 x 30 ft (9.1 x 9.1 m); CTI-220 and CTI-280, 25 x 25 ft (7.6 x 7.6 m). CTI-356 is intended for proximity

detection only. CTM-530(LT) Interface Module distinguishes between a mechanical short in the CTI heat detector and thermal

alarm activation. CTM-530(LT) operates on 12 or 24 V dc and provides relay and 4-20 mA outputs for connection to a

compatible Approved control. CTM-530 operating temperature range is -20ºF (-29ºC) {-40ºF (-40ºC) for LT version} to 120ºF (49ºC).

口碑好的CTI-280X感温电缆138C制造厂家_拖链电缆相关-上海道夫自动化仪表工程有限公司

　　依据《电气用品安全法施行令》第九条，以下相关LED灯、LED灯具已成为管制对象：额定电压100V～300V，原装进口CTI-TC85-感温火灾探测电缆85批发价格,电缆连接器相关，原装进口CTI-TC85-感温火灾探测电缆85批发价格,橡套电缆相关，原装进口CTI-TC85-感温火灾探测电缆85批发价格,其它电线、电缆相关，50Hz、60Hz，额定功率1W及以上、有一个金属灯头的LED灯泡;额定电压100V～300V，50Hz、60Hz，额定功率1W及以上的LED灯具(防爆灯具除外)。纳入管制的LED灯、LED灯具，圆形PSE测试所依据的安全和电磁兼容标准只有省令1项，省令2项的协调标准尚未出台，因此与LED相关的IEC标准不在《电气用品安全法》接受范围。日本通过分门别类进行抽查管制电气用品。目前，日本主要用E14、E26灯头，国内企业出口这类产品时需要注意灯头的规格。中国的大功率LED产品可以出口到日本，灯管出口到日本无需PSE认证，灯具、电源以及直流灯杯可以通过独立包装出口合理规避日本法规。 验收程序，验收申请加油站、储油库、油罐车在获得环保监测合格报告后，按照属地管理原则，向有管辖权的县级及以上环保部门提交环保验收申请，申请油气污染治理工程环保验收。受理验收申请的环保部门负责组织开展验收工作。各县（市、区）通过油气回收治理环保验收的加油站、储油库和油罐车，上海道夫自动化仪表工程有限公司,道夫自动化仪表工程,由县级环保部门将一份验收材料报聊城市环保局审查备案。治理单位申请验收时应提供以下材料：验收申请表、环保验收监测报告、油气污染治理方案、设计施工图、设计单位资质证明文件、施工单位资质证明文件、油气回收设备供应商资质文件、计量检定报告、安全评估报告、防爆合格证等，油罐车业主需另外提交车辆营运许可证和行驶证，并提供复印件。

Electrical Signaling

Electrical protective signaling systems are configurations of components used to produce alarm signals indicative of fire, smoke,

sprinkler waterflow or other emergency and to produce supervisory signals indicative of conditions needing attention with respect to

protection equipment or watch service. System configurations are classified according to where and how the signals are received.

The categories are commonly designated as local, municipal, remote station, proprietary, emergency voice/alarm communication,

emergency communication, and central station. Auxiliary systems are either local or proprietary systems interconnected with a

municipal system.

This category presents the major system component categories and the integrated system configurations. The selection of

components to form a hybrid system should be made only by those skilled in system design. Also, the suitability of any system

application should be judged on the basis of the hazard(s) being protected.

Alarm Signal Initiating Devices

Alarm signals are initiated either automatically or manually. Automatic detectors respond to changes in characteristic phenomena

associated with fire or other emergency conditions.